CLASSIC OAK CREST T-MOLDING 45 X 2400

Please ensure installation instructions are followed (printed on the back of each box). Any breach of instructions may cause performance issues and will void the product warranty.
-Stone based waterproof floors
-0.55mm wear layer (suitable for high traffic)
-Underlay pre-attached
-6mm perimeter gap required.
- Areas that are exposed to direct sunlight and temperatures over 40°C or subject to significant temperature fluctuations, the expansion joint should be increased to 10mm
-Max temp: 50 degrees min temp: 10 degrees
-Floorprep: less than 5mm over 3m
-Skirtings must not be silconed (only wet areas)